DASSY Boston Two-Tone Work Trousers n.º 44 +/- 245 g/m² Beige/Black
Available
5414729031415
'- These two-tone work trousers do not only have many practical pockets (include knee pockets), they are also reinforced in strategic areas with the extremely resistant Cordura® fibre. What's more, the Cordura® knee pockets can be adjusted in height to ensure that your knee pads are in the best position to protect your knees.
- PESCO 61, +/- 245 G/M²
- PESCO 61, +/- 245 G/M²
Add to cart
40,00 €
and shipping is free
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 5414729031415 | |||||||||||
DASSY Boston Two-Tone Work Trousers n.º 44 +/- 245 g/m² Beige/Black |
|||||||||||
|
Description'- These two-tone work trousers do not only have many practical pockets (include knee pockets), they are also reinforced in strategic areas with the extremely resistant Cordura® fibre. What's more, the Cordura® knee pockets can be adjusted in height to ensure that your knee pads are in the best position to protect your knees. |
||||||||||
PRODUCTS DATA
|
|||||||||||
SPECIFICATIONS
|
|||||||||||
16 other products in the same category:
home
KING TONY 3/4' 6 Points Metric Deep Impact Socket 3/4' 34mm- Intern 6 points metric deep impact socket;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
home
PFERD Polifan Flap Discs Performance Line A-COOL SG Inox + Alu Flat Type PFF...- POLIFAN flap disc with particularly cool grinding on materials with poor thermal conduction such as stainless steel (INOX) and aluminium.
- Materials that can be worked: stainless steel (INOX), aluminium, other nonferrous metals.
- Applications: surface grinding, weld dressing, chamfering, deburring.
- Abrasive: Aluminium oxide A with active grinding, cooling coating (COOL).
- Materials that can be worked: stainless steel (INOX), aluminium, other nonferrous metals.
- Applications: surface grinding, weld dressing, chamfering, deburring.
- Abrasive: Aluminium oxide A with active grinding, cooling coating (COOL).
hand-tap-mf-din-2181-hss
RUKO Hand Tap MF DIN 2181 HSS, Rectified (Ø 14,50 mm)
mitre-saws
DeWalt 1850W - Ø250mm Compact Slide Mitre Saw-Extendable arm to maximise the cutting width. -New 1800W motor for increased cutting capacity in all materials. -The innovative XPS shaded cutting indicator line provides accurate and fast blade alignment while illuminating the workpiece for increased productivity.
home
DASSY Vegas Work Trousers n.º 50 +/- 245 g/m² Black'- Work trousers with reflective tape
- Thanks to the reflective tape around the lower leg and the variety of practical pockets, these service trousers perfectly meet the needs of professionals in industries such as logistics, warehouse, transportation,
- PESCO 61, +/- 245 g/m²
- Thanks to the reflective tape around the lower leg and the variety of practical pockets, these service trousers perfectly meet the needs of professionals in industries such as logistics, warehouse, transportation,
- PESCO 61, +/- 245 g/m²
bomba-de-agua-chg0040102011000
CHEMITOOL AGRO Stainless Steel Main Body Dirty Water Pump 550w- Stainless Steel Main Body Dirty Water Pump 550w.
home
DeWalt Mesh Sanding Discs 150mm G240- Mesh sanding sheets last at least four times longer than traditional DeWalt sandpaper sheets.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
twist-drill-din-340-n-hss-g
CHEMITOOL CUTTING 281X160MM Ø25 DIN345 HSS-G Morse Taper Spiral Fully Ground...- Fully ground;
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.