bucha-nylon-com-bordo
CHEMITOOL FASTENERS Nylon Plug with Collar LV059 Ø12mm (Pack)-Nylon Bushing with Ø12MM Edge (SACK).
DASSY Tavira Softshell Jacket 2XL +/- 280 g/m² Red
Ready to Ship
5414729059310
'- The DASSY® Tavira softshell stands for a new generation of outdoor clothing: even more flexible, breathable and comfortable. Count on three-layered protection against bad weather that follows your every move. *The fabric is waterproof, not the garment itself.
- PES 21, +/- 280 G/M²
- PES 21, +/- 280 G/M²
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 5414729059310 | |||||||
DASSY Tavira Softshell Jacket 2XL +/- 280 g/m² Red |
|||||||
|
Description'- The DASSY® Tavira softshell stands for a new generation of outdoor clothing: even more flexible, breathable and comfortable. Count on three-layered protection against bad weather that follows your every move. *The fabric is waterproof, not the garment itself. |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
cola-termofusiivel-multiusos
STANLEY® DUALMELT™ Dual Temperature Transparent Glue Sticks (Pack of 24) 7x100mm
fita-de-serra-para-metal
LENOX Saw Classic Tape 2680X27X0,9 Z6/8- Aluminum / non-ferrous applications;
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.
home
DeWalt Mesh Sanding Discs 150mm G80- Mesh sanding sheets last at least four times longer than traditional DeWalt sandpaper sheets.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
cutting-tools
PFERD Combidisc Abrasive Discs Ceramic Oxide Grain CO-COOL CD G60 75 mm- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
din-6923-porca-sextavada-com-flange
CHEMITOOL FASTENERS Hex Nut with Gripped Flange DIN 6923 M10 |6| Yellow...- Porca Sextavada com Flange Serrilha Yellow Passivated;
- DIN 6923;
- Material: |6|;
- Acabamento: Yellow Passivated.
- DIN 6923;
- Material: |6|;
- Acabamento: Yellow Passivated.
din-6914-parafuso-sextavado-estrutural
CHEMITOOL FASTENERS Partial Thread Hexagon Screw - Structures DIN 6914...
din-7504p-parafuso-cabeca-embeber-ph
CHEMITOOL FASTENERS Self Drilling Screw Countersunk Head PHILLIPS DIN 7504P...- Self Drilling Screw QDR Oxidised;
- DIN 7504P;
- Material: Steel.
- DIN 7504P;
- Material: Steel.
sargento-de-corredica-tipo-t
T-Bar Clamps Serie 136 IRWIN 1070 mm-These clamps resist torsion and deformation under pressure.
chaves-mistas
KING TONY Metric Combination Wrench 22mm- European slimline type;
- 15° open ended angle;
- 15° ring end of fset from shaft;
- Chrome vanadium alloy steel;
- Chrome plated;
- Metric size - DIN3113, ISO7738;
- Inch size -ANSI/ASME B107.6.
- 15° open ended angle;
- 15° ring end of fset from shaft;
- Chrome vanadium alloy steel;
- Chrome plated;
- Metric size - DIN3113, ISO7738;
- Inch size -ANSI/ASME B107.6.
