CHEMITOOL SAFETY offers a complete range of protection and safety equipment - goggles, masks, workwear and gloves, capable of enhancing comfort and safety of the industry's collaborators.
CHEMITOOL SAFETY offers a complete range of protection and safety equipment - goggles, masks, workwear and gloves, capable of enhancing comfort and safety of the industry's collaborators.
'- Wind- and waterproof work jacket - Equipped with watertightproof seams and a high-performance waterproof, windproof and breathable fabric, the DASSY® Hyper offers afail-safe protection against the rain. Also, you can keep out icy wind by adjusting the width of the cuffs or waist yourself. - PES 80, +/- 200 g/m²
- Composite toe cap; - No metal eyelet; - Non-metallic anti-perforation insole; - Anti-static sole with impact absorption on the heel; - Oil and hydrocarbon resistant sole; - Double density PU outsole and non-slip SRC; - WRU – resistant to water penetration through the upper; - Chromium-Free.
The Cotton Glove 330 is a seamless glove that reduces irritation during long periods of use. use. Its ergonomic design fits like a second skin to reduce hand fatigue. Reinforced thumb zone and natural and natural rubber coating ensure greater resistance to abrasion and protected hands during heavy-duty work. The dark colours prevent staining and keep gloves to a higher standard for longer.
- Seamless polyamide glove with black nitrile palm and fingertips. Open back. - According to the European requirements for personal protective equipment (PPE) EN388 and EN420.
'- This polo shirt, in addition to being comfortable, the light and pleasant fabric offers UV protection from the sun. Thanks to the hidden mesh ventilation under the collar, this polo shirt is your obvious choice when working in hot temperatures or doing labor intensive work. - PES 44, +/- 215 g/m²
'- Work trousers - These work trousers offer a spectrum of advantages: in the versatile Cordura® reinforced pockets, you can quickly store all your tools within reach. The hidden button and zipper eliminate the risk of scratches or electrical conductivity on the job. - PESCO 63, +/- 250 g/m²
- High resistance against grease and oils; - Suitable for wide uses in the agricultural and industrial sector; - Antibacterial, abrasion-resistant jersey lining; - Non-slip sole with shock absorption in the heel area.
The SHOWA 546 Cut Resistant Glove with DURACoil liner and reinforced with HPPE, this cut and abrasion resistant glove is an ultra-comfortable multi-purpose work glove. The polyurethane foam palm coating provides good grip and breathability tohands dry inside the glove. An ergonomic, seamless design reproduces the natural curves of the hand for increased dexterity and comfort during long periods of use.
- Light, smart and dynamic design; - Impact-resistant steel toe cap up to 200J; - Anti-perforation insole; - Antibacterial abrasion resistant jersey lining; - Hydrocarbon resistant, antistatic, and non-slip sole; - Shock absorption in the heel area; - High level of slip resistance.
- Nitrile glove with interlock support, ventilated back and elastic cuff. - According to the European requirements for personal protective equipment (PPE) EN388 and EN420.
Filter type A1 B1 E1 K1. - TYPE A (BROWN) Against organic gases and vapours with boiling point > 65ºC (solvents and hydrocarbons). - TYPE B (GREY) Against inorganic gases and vapours, except carbon oxide. - TYPE E (YELLOW) Against sulfur dioxide and some acid gases and vapors. - TYPE K (GREEN) Against ammonia and some amino derivatives.
