Sort by:
hand-tap-m-din-352-hss
RUKO Hand Tap M DIN 352 HSS (Ø 26,50 mm)
hand-tap-m-din-352-hss
TERRAX by RUKO Hand Taps M12 DIN 352 HSS- Taper tap: 5 - 6 thread chamfer.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
single-cut-tap-npt-hss
Single-cut Tap M ≈ DIN 352 HSS-Co 5 (Ø 5,00 mm) RUKO
hand-tap-m-din-352-hss
TERRAX by RUKO Hand Taps M10 DIN 352 HSS- Taper tap: 5 - 6 thread chamfer.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
macho-individual-n2-din-2181-final
MACHO Nº 3 HGB-DIN352-HSS-60°-M 30x3,50
single-cut-tap-npt-hss
Single-cut Tap M ≈ DIN 352 HSS (Ø 5,00 mm) RUKO
single-cut-tap-npt-hss
Single-cut Tap M ≈ DIN 352 HSS-Co 5 (Ø 6,80 mm) RUKO
single-cut-tap-npt-hss
Single-cut Tap M ≈ DIN 352 HSS (Ø 8,50 mm) RUKO
hand-tap-m-din-352-hss
RUKO Hand Tap M DIN 352 HSS (Ø 21,00 mm)
single-cut-tap-npt-hss
Single-cut Tap M ≈ DIN 352 HSS (Ø 3,30 mm) RUKO
hand-tap-m-din-352-hss
RUKO Hand Tap M DIN 352 HSS (Ø 3,30 mm)
macho-manual-din-2181-unf-jogo
RUKO Hand Tap UNF ≈ DIN 2181 HSS, Rectified (Ø 17,50 mm)
hand-tap-mf-din-2181-hss
RUKO Hand Tap MF DIN 2181 HSS, Rectified (Ø 5,20 mm)
macho-manual-din-352-esquerda-jogo
JG.MACHO ROSCA ESQUERDA M3X0.5mm
hand-tap-m-din-352-hss
RUKO Hand Tap M DIN 352 HSS (Ø 14,00 mm)
single-cut-tap-npt-hss
RUKO Single-cut Tap NPT HSS, Rectified (Ø 14,10 mm)
macho-manual-individual-din-352-bsw
RUKO Hand Tap BSW ≈ DIN 352 HSS, Rectified (Ø 5,10 mm)
macho-individual-n2-din-2181-final
Taps II DIN 2181 M13 x 1.0mm set RUKOThe hand tap consists of heavy-duty high-speed steel. For through threads and bottoming threads in unalloyed and low-alloyed steelsup to a strength of 800 N/mm², malleable cast iron and non-ferrous metals. The thread is cut in three operation.
hand-tap-m-din-352-hss
TERRAX by RUKO Hand Taps M4 DIN 352 HSS- Taper tap: 5 - 6 thread chamfer.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
