Sort by:
hand-tap-m-din-352-hss
TERRAX by RUKO Hand Taps M5 DIN 352 HSS- Taper tap: 5 - 6 thread chamfer.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
hand-tap-m-din-352-hss
RUKO Hand Tap M DIN 352 HSS (Ø 15,50 mm)
hand-tap-m-din-352-hss
RUKO Hand Tap M DIN 352 HSSE-Co 5 (Ø 15,50 mm)
hand-tap-m-din-352-hss
RUKO Hand Tap MF DIN 2181 HSS, Rectified (Ø 1,60 mm)
single-cut-tap-npt-hss
Single-cut Tap G ≈ DIN 5157 HSS, Rectified (Ø 15,00 mm)
hand-tap-mf-din-2181-hss
RUKO Hand Tap MF DIN 2181 HSS, Rectified (Ø 20,50 mm)
hand-tap-m-din-352-hss
RUKO Hand Tap M DIN 352 HSSE-Co 5 (Ø 6,80 mm)
macho-manual-individual-din-352-bsw
RUKO Hand Tap BSW ≈ DIN 352 HSS, Rectified (Ø 19,25 mm)
hand-tap-m-din-352-hss
TERRAX by RUKO Hand Taps M8 DIN 352 HSS- Taper tap: 5 - 6 thread chamfer.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
hand-tap-mf-din-2181-hss
RUKO Hand Tap MF DIN 2181 HSS, Rectified (Ø 2,60 mm)
hand-tap-m-din-352-hss
TERRAX by RUKO Hand Taps M18 DIN 352 HSS- Taper tap: 5 - 6 thread chamfer.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
macho-individual-n2-din-2181-final
Taps II DIN 2181 M13 x 1.0mm set RUKOThe hand tap consists of heavy-duty high-speed steel. For through threads and bottoming threads in unalloyed and low-alloyed steelsup to a strength of 800 N/mm², malleable cast iron and non-ferrous metals. The thread is cut in three operation.
extensao-din-377
RUKO Extension Sleeves DIN 377 (L 110,0 mm)
macho-manual-din-2181-unf-jogo
RUKO Hand Tap UNF ≈ DIN 2181 HSS, Rectified (Ø 22,00 mm)
hand-tap-mf-din-2181-hss
RUKO Hand Tap MF DIN 2181 HSS, Rectified (Ø 16,00 mm)
single-cut-tap-npt-hss
RUKO Single-cut Tap NPT HSS, Rectified (Ø 14,10 mm)
hand-tap-m-din-352-hss
TERRAX by RUKO Hand Taps M4 DIN 352 HSS- Taper tap: 5 - 6 thread chamfer.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
