MARCO EUROCONECTOR
Ready to Ship
ST77335
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference ST77335 | |||||||
MARCO EUROCONECTOR |
|||||||
 |
Description |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
hand-tap-m-din-352-hss
JG. MACHOS M5X0,8
lamela-de-perno-para-metais-extra-duros
PFERD Mounted Flap Wheels 6 x 40 mm Silicon Carbide SiC G60 30 x 10 mm- For universal grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.
lamela-de-perno-para-metal
PFERD Mounted Flap Wheels Shank 6 mm Aluminium Oxide A G60 40 x 10 mm- For universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A.
- Abrasive: Aluminium oxide A.
core-drill-hss-3-4-cbn-weldon
TERRAX by RUKO Core drills HSS with weldon shank (3/4'), cutting depth 30,0...- The 3-edged geometry with spiral grooves allows for extremely high stability of the Solid 3 drill bit and thus prevents the danger of edging due to excessive overloading or jamming of the chips.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
ferro-fundido-desbaste-de-bordo
MO MONTADA A3 6 CU 30 R 5V
home
BETA 351 8mm Replacement Ferrule-Reversible ratchet with 1/2 square male drive, 48-tooth mechanism, chrome plated.
molas
MOLA
chaves-tubulares-e-de-cachimbo
KING TONY 12x6 Point Metric Angled Socket Wrench 1080 26mm- Characteristics:
- Angle and through-hole design;
- High quality steel, chrome plated;
- Deep recess at one side and open end socket at the other, easily fit over protruding studs;
- ISO 2236.
- Angle and through-hole design;
- High quality steel, chrome plated;
- Deep recess at one side and open end socket at the other, easily fit over protruding studs;
- ISO 2236.
chave-de-caixa-longa-impacto-1-2
KING TONY 1-1/8' - 1/2' 12 Points Metric Deep Impact Socket- ANSI/ASME B107.2;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
pvc-safety-footwear
CHEMITOOL SAFETY S5 PVC Boot With Steel Toecap and Insole N44- Polyester and PVC/Nitrile, metal eyelets.
- Breathable, antibacterial and abrasion-resistant polyester lining.
- Breathable, antibacterial and abrasion-resistant polyester lining.
home
CHEMITOOL BY PAYPER WORKER Trousers Navy Blue L- 100% cotton.
- Triple stitching on legs.
- Pocket for tape measure.
- Side pocket with LOCK SYSTEM closure.
- Reflective tapes in the back pocket.
- Triple stitching on legs.
- Pocket for tape measure.
- Side pocket with LOCK SYSTEM closure.
- Reflective tapes in the back pocket.
abracadeira-reforcada-isofonica-m8m10
CHEMITOOL FASTENERS Isophonic Reinforced Clamp M8/M10 W4 Ø90 A2 Passivated...-Isophonic clamps allow quick and easy installation of steel, copper and PVC pipes.
