From A to Z, the CHEMITOOL FASTENERS offers a full range of innovate solutions - since tuning washers to cylindrical pins, from DIN 1 to DIN 82101, with sizes from M1x2 to M72x600.
From A to Z, the CHEMITOOL FASTENERS offers a full range of innovate solutions - since tuning washers to cylindrical pins, from DIN 1 to DIN 82101, with sizes from M1x2 to M72x600.
- Flex-O-Post. - On-off switch. - V shaped bottom part of the base for clamping on tree, shaft and vice plates. - Locking lever. Tension the inner cable to lock the arm in position. - Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank. - The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions. - Clock clamp at end of arm can be rotated 360° and locked in any position. - Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank). - Vertical range of approximately 380mm (15) and horizontal range of 250mm (10) - Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
