ANI Dual Pin Universal Quick Coupler with Tailpiece

home

PPFERD Coated Abrasives Short Belts Ceramic Oxide Grain CO-COOL G120 20 x 520 mm

For aggressive grinding with the highest stock removal rates on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL

Ready to Ship

din-7985-parafuso-cabeca-queijo-ph

CHEMITOOL FASTENERS Cross Recessed Raised Pan Head Screw PHILLIPS DIN 7985...

- Cross Recessed Raised Pan Head Screw PHILLIPS Passivated Stainless Steel;
- DIN 7985;
- Material: A4;
- Finishing: Passivated Stainless Steel.

Ready to Ship

home

CHEMITOOL BY PAYPER Nepal Polar Jacket Navy Blue XL

- 100% polyester.
- Single zip fastening with simple slider.
- Elasticated cuffs and waistband.

Ready to Ship

din-7504n-parafuso-cabeca-queijo-quadra

CHEMITOOL FASTENERS Self Drilling Screw Pan Head Square Recess DIN 7504N...

- Self Drilling Screw QDR Passivated Stainless Steel;
- DIN 7504N;
- Class: A2;
- Material: Stainless steel.

Ready to Ship

home

RODIZIO 120/FF-150

Ready to Ship

home

SOMTA Drill DIN1897 HSS Ø 5,3 mm 118˚

Ready to Ship

home

O-Ring 46 x 2.5

Ready to Ship

din-7603a-anilha-de-vedacao

CHEMITOOL FASTENERS Aluminium Standard Seal Ring DIN 7603 A 14X18X1,5

-Aluminium Standard Seal Ring DIN 7603 A 14X18X1,5.

Ready to Ship

chave-de-caixa-curta-impacto-1-2

KING TONY 1/2' 6 Points Extra Thin Wall Impact Socket 21mm

- 1/2 DR. Impact extra thin wall socket;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk;
- Super thin wall version has less strength than standard deep version;
- For aluminum alloy wheel.

Ready to Ship

serra-craneana-hss-bimetalica-co-8

CHEMITOOL CUTTING HSS M42 Bimetal Hole Saws Ø79MM 8% Cobalt

- Great quality/value ratio;
- Available from diameter 14 to 152mm;
- Fine teeth (10TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M42 high speed steel;
- Suitable for: Stainless steel, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.

Ready to Ship

home

KRANZLE Lance 500mm with Turbo-Jet Nozzle 042

Ready to Ship

home

PFERD Rubber Drum Holders Cylindrical GK 1925/6

- These sandpaper holders have a smaller elasticity and are therefore more suitable for sanding corners and edges.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.

Ready to Ship

twist-drill-din-338-n-hss-g

TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 11 mm)

- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.

Ready to Ship

din-912-parafuso-cabeca-cilindrica

CHEMITOOL FASTENERS Hexagon Cap Screw Cylindrical Head DIN 912 M4x16 A4...

- Hexagon Cap Screw Cylindrical Passivated Stainless Steel;
- DIN 912;
- Material: A4;
- Finishing: Passivated Stainless Steel.

Ready to Ship