Cutting Tools

fita-de-serra-para-metal

LENOX 5055x34x1,07 Z6/10 Classic Saw Band

- Aluminum / non-ferrous applications;
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.

Available

twist-drill-din-340-n-hss-g

RUKO Spiral Bits DIN 345 - Cone Morse Nº4 HSS (Ø33,50mm)

- Main application Steel (N / mm²) <900 and cast iron

- Secondary application Brass and bronze

Available

sds-plus-hammer-drill-3-cutters

DeWalt SDS Plus Extreme Bit 2 Cuts 9x210mm

- The Innovative EXTREME 2® SDS-Plus drill bit is amongst the best in terms of its speed, life and endurance.
- Superior carbide grade for long life and greater durability.
- Optimised flute design allows efficient debris removal.

Available

fita-de-serra-para-metal

LENOX Saw Classic Tape 2825X27X0,9 Z8/12

- Aluminum / non-ferrous applications;
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.

Available

tungsten-carbide-burr-a-cylinder-zya

PFERD Ø8x20mm ZYA High Performance Carbide MICRO Cylindrical Milling Cutter

- High surface quality;
- Unlike with mounted grinding points, there is no change in geometry due to wear and tear;
- Use on almost all materials up to 68 HRC;
- The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Available

tungsten-carbide-burr-m-cone-skm

PFERD Tc Burrs For Universal Applications - Conical Pointed Shape Skm 1225/6...

- Conical pointed burr according to DIN 8032 with cut conforming to DIN 8033, flattened tip.

Available

lima-meia-cana-de-ponta

PFERD Files Half-Round Pointed DIN Series (without Handle) 100 mm

- Half-round pointed file, cut on two sides.
- Version with tang.
- Shape E according to DIN 7261.
- Suitable for work on radii and for filing of half-round shapes.

Available

twist-drill-din-338-n-hss-g

RUKO Twist Drill 1,6mm DIN 338 type N, HSS Rolled

High-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity.
Thanks to the split point, this drill has good centring properties and requires little pressure.

Available

tungsten-carbide-burr-l-round-cone-kel

FRESA METAL DURO CON RD KEL 1230/6 INOX

Conical burr with radius end according to DIN 8032.

Available

escovas-e-catrabuchas

PFERD INOX Ø60x10mm Round Knot-Free RBU Brush with Handle

- Optimal adaptation to the contour of the workpieces due to high flexibility;
- Very good corrosion resistance;
- Creates fine surfaces.

Available

fita-de-serra-para-metal

CHEMITOOL CUTTING Band Saw Blade POWER PRO 2450x27x0,9mm Z4/6P

- 8% Co teeth (M42);
- High cutting performance;
- Width from 13 to 67mm;
- Thickness from 0,6 to 1,6mm;
- Uniform welding;
- Resistance to breakage;
- Long tool life.

Available

fita-de-serra-para-metal

CHEMITOOL CUTTING Band Saw Blade POWER PRO 6000X41X1,3 Z5/7P

- 8% Co teeth (M42);
- High cutting performance;
- Width from 13 to 67mm;
- Thickness from 0,6 to 1,6mm;
- Uniform welding;
- Resistance to breakage;
- Long tool life.

Available

twist-drill-din-338-n-hss-g

BROCA CILINDR. RECTIFICADA HSS 10,25

Available

mo-ceramica-aco-dureza-50-hrc-cinza

M.PLANA 200X25 C.N. A-60

- General purpose for grinding and sharpening applications in steel and tools lower than 50 Hrc. hardeness.

Available

machine-tap-m-din-376-hss-c

CHEMITOOL CUTTING M18 Machine Tap DIN376 – Type B HSSE-G Co5

- Excellent quality/value ratio;
- Easy to use;
- DIN 376;
- Type B;
- Available in blue ring and green ring;
- Fully rectified;
- Resistant to breakage;
- Thread: M18;
- Material: HSSE-G 5% Cobalto.

Available

bi-metal-hss-hole-saw

IRWIN WELDTEC Bi-Metal Hole Saw Ø83 mm

- WELDTEC™ Technology;
- 4,5 / 5,5 VARIABLE TPI;
- Variable gullet depths;
- Thick backing plate;
- Bi-metal construction.

Available

mo-ceramica-aco-dureza-50-hrc-cinza

M.PLANA 200X40 C.N. A-80

- General purpose for grinding and sharpening applications in steel and tools lower than 50 Hrc. hardeness.

Available

sets

TERRAX by RUKO Taper and Deburring Countersinker Sets DIN 335 Type C 90°...

- DIN 335 Type C 90º.
- Ø 6,3 - 8,3 - 10,4 - 12,4 - 16,5 - 20,5 mm.

Available

grosa-para-madeira-retangular

PFERD Hand Wood Rasps (without Handle) for Universal Use 200 mm

- Rectangular file with cut on three sides, flat sides with rasp cut, one edge with file cut, one edge uncut.
- Shape A according to DIN 7263.
- Version with tang.

Available

bi-metal-hss-hole-saw

DeWalt Extreme Bi-Metal Holesaw 114mm

- Reduced wall thickness for fast cutting speed across a range of materials even the most demanding applications.
- Premium quality high speed steel with 8% cobalt for stronger, longer lasting teeth to cope with heavy cutting applications.
- Optimised tooth geometry for accurate, fast cuts-sharper teeth with an aggressive cutting edge cuts through material faster.

Available

grosa-para-madeira-lanceteira-meia-cana

PFERD Cabinet Rasps 300 mm

- Half-round file, tapered with rasp cut on two sides.
- Shape D according to DIN 7263.
- Version with tang.
- Wider and flat than a half-round wood rasp.
- Suitable for work on surfaces, radii, half-round profiles and edges (chamfering and rounding).

Available

mo-ceramica-aco-dureza-50-hrc-cinza

M.PLANA 200X20 C.N. A-80

- General purpose for grinding and sharpening applications in steel and tools lower than 50 Hrc. hardeness.

Available

fita-de-serra-para-metal

FITA SERRA POWER PRO 6100X41X1,3Z4/6P

Available